Nylon Vacuum Bagging Film for Laminated glass use
High temperature resistant nylon vacuum bag film, with a
temperature resistance range from 120-240℃, high tensile strength, specially designed for the composite
material hot-press molding process, good barrier properties under
high temperature and high pressure, suitable for a variety of resin
system vacuum bag technology.
1. Standard size of vaccum film for option:
|No.||Specification (Width x Length)||Unit||Temperature||Color||Material|
|1||3000mm x 153m||One roll||204℃||Green||NYLON|
|2||3000mm x 170m||Min. Order 20 rolls||120℃||Yellow||Multi-composite|
|2||1650mm x 250m||One roll||120℃||Transparant||PE|
|3||2100mm x 250m||One roll||120℃||PE|
|4||2300mm x 250m||One roll||120℃||PE|
|5||2500mm x 250m||One roll||120℃||PE|
|6||2700mm x 250m||One roll||120℃||PE|
|7||3000mm x 200m||One roll||120℃||PE|
- Our technology has the ability to process a variety of difficult
laminated glass (such as a variety of curved glass or embossed
glass laminated, as well as the United States DuPont SGP
explosion-proof film laminating), high yield, easy to learn, less
investment (The price is far lower than that of similar foreign
products). At present, CSG, AVIC Sanxin, Chuangyi Technology,
Jiangmen Junfa Glass, Foshan Nanliang, Jiangsu Aolan and many other
companies all use our technology.
3. Brief introduction for vacuuming process:
- Let's take a brief introduction for the vacuum film to make
- When processing curved tempered glass or hot-bending glass
laminating, it is often impossible to perform normal rolling
processing due to the arc length or high arch height of the glass.
And when laminating the DuPont SGP explosion-proof film, Most
manufacturers use a glass with a vacuum strip around a circle, put
it into the drying box and vacuum it, then enter the autoclave.
- Since the vacuum belt only surrounds the glass one circle, it is
not completely sealed, so the product quality problem often occurs,
the equipment and process input of the drying box are increased,
and the cost is high and the efficiency is low.
- In addition, when processing the patterned glass, glass surface is
wavy or other uneven shape, so that the vacuum strip cannot seal
the glass at all and cannot be processed.
- Our solution is to completely seal the glass with a vacuum bag and
directly into the autoclave for vacuuming and form once. It has the
characteristics of high yield, high efficiency and easy to learn.
At the same time, this method is also suitable for making super
large and wide laminated glass.